Eight stages, in the order your concrete moves through them.
Covered aggregate stockyard
Graded stone and sand arrive from NA Stone Crusher and Screening Plant and are stockpiled by size under a covered bay, so rain never changes the moisture content we batch against. A backhoe loader feeds the bins from the pile.
Feed hopper & belt conveyor
Aggregate is loaded into the feed hopper and carried up an enclosed belt conveyor into the plant's weigh bins. The enclosure keeps material dry and dust down on the way up.
Admixture & water dosing
Admixture drums and water sit at the foot of the conveyor, dosed into the mix by the plant's controller rather than by hand — so workability and water-cement ratio hold from the first batch of the day to the last.
Cement silos
Premium TOPCEM and UltraTech cement is stored in our silos — 100 MT (72 m³) of capacity — and screw-conveyed straight into the mixer. Sealed storage means no bag handling, no moisture pickup, and no pause between batches.
Schwing Stetter M1T batching
The M1T weighs every constituent to the mix design and mixes one cubic metre a minute. Batching is computerised, so the M25 you order in March is the same M25 you order in November.
Charging the transit mixer
The mixer pulls in under the discharge chute and takes its load in a single charge. Seven mixers rotate through the bay, which is what lets us hold a pour schedule instead of a rough delivery window.
Weighbridge & site office
Loaded mixers cross our own 100 MT weighbridge — 16 m × 3 m — before leaving the gate. The weighbridge, site office and laboratory share one building, so weighment, docket and cube sampling all happen at the same desk.
Cube sampling & curing
Cubes are cast from the batch, marked with the party name and date, and cured in our temperature-maintained vat until their 7 and 28-day tests. Every cube in the vat belongs to a specific client's pour — that is your strength record, on request.
See the laboratory →Everything under one gate at Darakahara.
Visitors are welcome. Come and watch a batch run before you place an order.
Plant location →Consented and operating on record.
The plant holds a Consent to Establish and a Consent to Operate from the Pollution Control Board, Assam. Both are displayed on the statutory board at our gate — reproduced here so contractors and tender officers can verify the numbers before they visit.
Vill: Dora Kahara, Modartala, Near Madanpur Toll Plaza, Dist: Kamrup Rural, Assam – 781101
Consent details as displayed on the board at the plant gate. Copies of both consents are available on request for tender submissions.
Tell us your grade, volume and pour date.
We will confirm availability, mix design and scheduling — usually the same day.